The new Decoder that works with only 12 volts, to allow you to view both unencrypted and payTV satellite channels thanks to the smart card reader. It is 100% compatible with the software of the DREAMBOX DM 500S allowing you with ALL NDS smart cards to view all the channels you are subscribed too. After the first update all others are automatic!!!!!
With firmware and settings that are continually developed, is the most updated best-selling decoder ever.
With its small size (only 19.5 x 13 x 4 cm) it is extremely easy to place it in the TV compartment in your RV.
Easy to use, intuitive controls that allow you to store an almost unlimited number of TV and Radio channels thanks to its integrated high capacity memory (in total 32 MB Flash & 64 MB RAM). It has third generation, AC3 Dolby Digital 5.1 for the Home Theatre, audio output. Equipped with a Card Reader that can read all codes.....
The connections at the rear of the decoder: on the left the satellite signal in & out points, audio and video out , RS232 port, scart connection, digital audio out optical, 12 volt power point to connect to power supply and ETHERNET port.
Technical specifications:
- 250 MHz PowerPC Processor (350 Mips)
- Linux Operating System
- 1 x integrated Smart Card
- MPEG2
- V.24/RS232 interface
- 10/100Mbit Ethernet compatible
- 2 LED to show status
- 32 MB Flash & 64 MB Ram (in total)
- Ability to store an infinite number of TV & Radio channels
- Fast channel change < 1 second
- Fully automatic channel scanning ability
- Direct call support for bouquet
- EPG support (electronic program guide)
- Subtitle support (Teletext)
- Supports multiple LNB (DiSEqC)
- OSD in many languages
- AC-3 S/PDIF output
- 1 Scart socket
DVB-S-Tuner:
- Frequency Range 950 - 2150 MHz
- Signal strength - 65 dBm to - 25 dBm
- Signal-to-Noise ratio of 12 dB max.
- DBS-Tuner Input Connector F-Type female
- 75 Ohm Impedance Input
- AFC +/- 3 MHz
- Demodulation Shaped QPSK Input
- FEC Viterbi and Reed-Solomon Decoder
- Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
- 35 % Roll-off Factor
- De-multiplexing according to ISO 13818-1
Video decoder:
- Video Compression compatible withMPEG-2 and MPEG-1
- PAL G/ 25 Hz Video Standard
- 4:3 / 16:9 video format
- 16:9 automatic format
- 4:3 TV Letterbox Device
Audio decoder:
- MPEG-1 & MPEG-2 Layer I and II
- Dual Audio Mode (main/sub), Stereo
- Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Analogue Audio:
- Output Level L/R 0,5 Vss on 600 Ohm
- THD > 60 dB (1 kHz)
- Crosstalk < -65 dB
Digital Audio:
- Output Level 0,5 Vss on 75 Ohm
- Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
- AC3 S/PDIF Optical Output
Video Parameters:
- Composite video input of 1 Vpp +/- 0.3 dB on 75 Ohm
- Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
- Output: Composite Video, RGB and S-Video
Serial RS 232:
- RS232 bidirectional
- Bit rate maximum of 115.2 Kbit/s
- SUB-D-9 pin connector
- Functions: Updates firmware
Ethernet:
- 10/100 MB
- Function: Updates software and PC interface
Count of active satellite position:
- DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
- DiSEqC - Rotor Control
Power consumption:
- < 15W / 12V
External power input:
- DC12V
Power:
- Input: 110-240V AC / 50-60Hz / 0.6A
- Output: 12V = / 2.5A
Dimensions & weight:
- Dimensions: (H x L x D): 195 mm x 130 mm x 40 mm
- Weight: 0.6 kg
Only with tecnoCAMPER, included in the price:
- Software and firmware updates as well as initial settings to obtain the maximum potential!!!!
- The cable to directly connect your Decoder to a 12 volt power supply, not found in the normal pack contents.
PACK CONTENTS:
- Ping Tech DVB500S DECODER
- Power cable
- A/V RCA cable
- 12 volt transformer
- Direct power cable for 12 volt supply
- Remote control
- Batteries for the remote control
- Instruction manual (in English)
.gif "Formaggeria del Corso")
